|
Introduction:
This
programming
Board is
designed
to be used
with
Serial,
ICP and
USB
programmers
detailed
elsewhere
on this
site.
In
view to
keep cost
low, board
contains
simple DIP
sockets of
20Pin,
18Pin,
28Pin
&
40Pin.
20Pin
socket may
be used
for
programming
of 8pin,
14pin
&
20pin PIC
Micro
Controllers.
18,
28 and
40pin
sockets
are
specific
to such
PICs.
New PB1.2: Revised PCBs : 12th
Dec 07
In my new run of PCBs, I have 20, 18, 28 and 40pin DIP sockets.
I have also amended 0.1uf Tantalum capacitors by 0.1uf
ceramic.
I have added LVP selector, a 4 position slide
switch, for those working with Low Voltage Programming, where a pull-down is
required. LVP pull-down resistor may be selected by user on Specific
Chip socket for specific purpose.
Interface
to ART2003
Programmer:
In view to extend various PICs,
hhis
programming
board may
be used
with
FD-ART2003
Parallel
Port
Programmer
detailed
elsewhere.
However,
you will
have to do
external
wiring
between
two boards
yourself.
Serial
& ICP
Programmers:
This
board is
100%
compatible
with FD-ICP
and FD-SPP
Programmers
Interface
to PICKIT2:
This
board is
pin
compatible
with
PICKIT2
& PICKIT2
USB
programmers.
You may
use this
programming
board to
program 8,
12, 18,
20, 28
& 40
pin PIC
Micro
Controllers.
|
FD-UPP: PIC18F2550 USB PIC Programmer
button. 
button
to see
what all
items you
have. You
may change
quantity
if
required
&
proceed to
"Check-out".
