| 1 |
Si5351 Signal Generator at 25MHZ |
| 2 |
Two Independent signal generation from 1 to 160MHZ |
| 3 |
Encoder for tuning, 1HZ to 1MHZ Steps Configurable. |
| 4 |
Two Button Simple Menu Operation (User +
Config)
|
| 5 |
IF OFFSET, Plus or Minus Values
|
| 6 |
Signal CLK0 is displayed on LCD
|
| 7 |
Second Signal (CLK1) from 1 to 160MHZ for 2nd IF etc.
|
| 8 |
Variable tuning steps from 1HZ to 1MHZ
|
| 9 |
2 X 16 LCD
|
| 10 |
Uses PIC18F25K22 Micro Processor
|
| 11 |
Receiver S Meter Option at PIC PIN2
|
| 12 |
Auto LCD Back Light OFF to save power
|
| 13 |
Internal
3.3V regulator and PCA9306 I2C Chip |
| 14 |
Small Size: 14CM X 4CM Glass epoxy PCBs |
| 15 |
Works on 5V DC |
| 16 |
Option
to use SMA Connectors for signal output or direct coax connect |
